- Видео 121
- Просмотров 500 064
GoForIt
Португалия
Добавлен 6 июн 2019
Go. Try it. Do it yourself
Here we take care of our own cars and bikes.
We build track cars.
We rebuild classic cars.
We do basic maintenance.
We test, install and review new stuff both on cars and bikes.
And for sure we use them.
Here we take care of our own cars and bikes.
We build track cars.
We rebuild classic cars.
We do basic maintenance.
We test, install and review new stuff both on cars and bikes.
And for sure we use them.
KTM & Husqvarna WP Xplor Fork Oil Seal and Bushing
For XPLOR fork caps fitted with preload adjusters, you should turn the preload adjuster with the cap when loosening from the cartridge. A KTM Special tool is available part # T14087. In my case, I designed and 3D printed a tool that works just fine. Damage to the preload adjuster thread may occur if you don't do this. If you want the stl for this tool, please leave a comment below and I will contact you.
If your XPLOR fork caps don't have preload adjusters you can just unscrew them from the cartridge rods without a special tool...
This shows you all the steps to change the fork oil seal in a WP XPLOR fork, fitted in 2020 KTM and Husqvarva offroad models. The video is long, but hopefully wil...
If your XPLOR fork caps don't have preload adjusters you can just unscrew them from the cartridge rods without a special tool...
This shows you all the steps to change the fork oil seal in a WP XPLOR fork, fitted in 2020 KTM and Husqvarva offroad models. The video is long, but hopefully wil...
Просмотров: 205
Видео
Toyota Auris Service - Fast easy and cheap
Просмотров 4167 месяцев назад
In this video, I show how to do the basic maintenance ( oil, filter, air filter cabin filter) on a Toyota Auris Van. As an extra, I show how to reset the service without any computer or dedicated tool. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Instagram: goforitgfi avalonkin...
Yamaha WR450F - Engine oil and filter
Просмотров 2968 месяцев назад
In this video, I change the engine oil and filter on my 05 Yamaha WR450F. You can see the torque values and details in the vídeo itself. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Instagram: goforitgfi avalonking.refr.cc/sergiom
Porsche Taycan - Screen Protector Install - Fast and Easy
Просмотров 2269 месяцев назад
In this video, I show how I've installed the screen protectors on my Porsche Taycan 4S. The procedure is valid for all the versions of the Taycan from 2019 until 2023. You can find the screen protectors used at the links below. PCM: www.amazon.de/-/en/gp/product/B09HXVL51M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Center console screen: www.amazon.de/-/en/gp/product/B08X7C8G63/ref=ppx_yo...
Service B9 Detailed - Mercedes CLS 250 cdi Shootingbrake
Просмотров 3,6 тыс.9 месяцев назад
In this video, I show how I did my service B9 on my 2013 Mercedes CLS 250 cdi Shooting Brake. All the products and torque settings are described in the video. Feel free to comment and ask any questions. Automatic transmission fluid change: ruclips.net/video/VCRf24dJYDs/видео.html Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: facebo...
Mercedes CLS - Automatic Transmission Fluid Change
Просмотров 11 тыс.11 месяцев назад
In this video, I show how to change the transmission oil (ATF) on my 2013 Mercedes CLS Shootingbrake 250 CDI fitted with an automatic transmission 7G-tronic (722.908). During the video, I mentioned the torques and product specifications. Enjoy. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Ins...
BMW R1200GS - How to replace the air filter - Detailed step by step
Просмотров 1,3 тыс.Год назад
In this video, I show step by step, how to replace the air filter on a 07 BMW R1200GS K25. It's a simple procedure but really useful, and that can be done with some basic hand tools. Do not forget to subscribe and follow us on the social networks DO NOT click here :) bit.ly/3mSJ4Ky Facebook: Go-For-It-547532252317418 Instagram: goforitgfi avalonking.refr.cc/sergiom
Can you do a video on replacing the 4 accessory belts?
It will came soon. I will change the timing belt and all the accessory belts.
Can you do a video on refurbishing the brake booster diaphragm?
Mine is working fine.
The battery is the same without start/stop system ?
I am not 100% sure. If you can afford it, for sure you can use an AGM battery. Check the spec from you current battery and if it says AGM it will be the same.
@@GFI I researched and the AGM battery is available in all condition but it’s more expensive… But on the CLS I have only AGM battery 🫠
O meu Cls fica um tempo parado, eu tenho reparado que tem uma partida pesada, acho que vou ter de substituir a bateria, abraço
Muito provavelmente sim.
Na marca demora 2 dias a fazer este serviço
Em casa é mais rápido e barato.😄
Awesome video!!! Thanks !
Thanks.
Great video, worked well. I have a 2009 cayenne s. Only thing different was there are two screws under the top air vent speaker that need to be removed behind the front top air vent.
Thanks for the additional info.
Dear teacher, honestly, I have a Mercedes-Benz Shooting Brake 250 CDI. The headlights are broken due to an accident and I want to replace them myself, but I don't know where the base of the lower lights should be installed. Please help me.
Hi. I've never removed the headlights. If you have the front bumper off it should be clear.
Hello dear professor, I watched your video, it is very informative. Do you have any other videos about half radiators or fan coolers? Also, the installation of Mercedes-Benz shooting brake headlights
Unfortunately no. Never disassembled the front end
👏🏻👏🏻👏🏻👏🏻
Helo brother can i know the screen andriod size 7inch or 9inch thanks
Hi. It's 9".
Hello! Do you know how this engine is called? It is a Pavesi engine, but which exact type is it?
Hi. As far as I know it's just called Pavesi 125CC Lamellar.
@@GFI Thank you very much!
I have a GS1200 its a 2007 model with ABs, I brought wired wheels, but the distance across the discs is too wide as measure 130, whereas the cast wheels measures 125... do you know why are there differences between the years? frustrating as cannot make the callipers sit wider
What model year are the wheels? There are differences for sure. Also the ABS ring can be different.
@@GFI they said were 2007-2009. I will need to check to see if they have a part number printed.
why do you people go through all this bollocks, I just can't believe the shit connected with owning a BMW . Get yourself a car you can actually drive.
Hello Sergio, First time here I bought 2007 the same color for my 40 birthday, so how can I request for you the spacer please?
Send me and email
Great video! How about model Y? 7:01 how to get to those 4 important bolts for camber adjustment but on model Y?? Would be highly helpful. Thank you in advance.
Hi. Not sure but I believe the procedure should be similar.
Just bought a led unit for my 2006 GS, how could I get hold of one of those spacers as don’t have a 3d printer?
Hi. Please send me an email.
All injectores lic
I used tbe same brand of diagnostic tool topdon.. However i cannot fint the health report. We have the same problem witj reception. But icNt find the real problem. Broken wirez or whatever.
Check the rear hinge. The problem is in that area for sure.
Hi man just wondering if it’s the same procedure on CLS320 v6 cdi from 2008 ( facelift model ) ? 🙏
I am not 100% sure, but it should be equal or really similar.
I know that this video is 2 years old , but i have the same problem with poor radio reception . I saw that you welded another wire in the outer layer - I suppose that it's the ground ? And where did you connect it ? To other ground or somewhere to body ? Thank you for response :) Cheers !
If I remember correctly I just weld it in one side and on the other because the original wire was totally broken.
Hello, the link to the Resistor Kit is no longer valid. Can you please send the information (seller, item name or new link) for the kit? Thank you!
The one I bought is not available anymore, and I cannot find the company name. Sorry.
Thank you, very informative Excellent mod
Thanks for you message. Do not forget to subscribe :)
Do you connect up the antenna ground wire to the Black vehicle ground wire ?
It was some time ago. In the video I show and explain all the connections in detail. Nothing was done off camera.
How did you get the internal panel of the tailgate off ?
If I remember correctly you have to push it out. It has a bunch of metal springs.
Boas. Tu es portugues? Eu tenho uma mota dessas. Sera que me podes ajudar com ela. Obrigado
Boas. Sim sou Português. Se souber ajudar. Qual é a questão?
@@GFI conhece o modelo igual a essa DT mas da Peugeot x125 . Sabe me dizer onde posso fazer a elétrica toda essa mota.? Onde comprar.
@@davidcarqueijeiro3237 fazer uma instalação nova, qualquer electricista auto deve conseguir fazer (especialmente se tiver a velha). Se estiver atento no facebook marketplace, por vezes aparecem vendedores a vender motas dessas às peças, pode ser que consiga encontrar uma instalação usada.
Replacing the battery is simple and easy, but do you have to code it?
Hello, may I ask ? I have on my tesla model 3 one front wheel tilted about 4mm in comparison the other side. Can it be adjusted by from the top of the suspension ?
By what I saw, 4mm it is maybe too much to be adjusted. But it is an easy procedure so maybe it worth try.
@@GFI but in general : When wheel is tilted (moved towards the back) then Can it be corrected from the top of the suspension as you did on your video ?
The top of the suspension is attached to a bracket that can be adjusted in and out. Can’t remember it you can move it back and forward. Sorry 😅
Hello, thank you for your superb video! Would it be possible to have the small 3D printed part to make the adjustment? Thanks in advance!
Hi Henri. Send me an email please.
Nice video, how much does B9 maintenancecost? mercedes oil is over 90€, but could I use Castrol Edge 5w30 instead?, And one more: I´m looking for the shooting brake 4 matic (so much rain in Galicia-Spain), What is the extra cost in this case? Thanks in advance.
Hi. This one in total was about €400 in parts. You can use the Castrol Edge with Mercedes approval. Not sure how much it will be more for the 4 matic but considering the oil change in the front diff it cannot be that expensive.
Thank you!
Con cuantos km hizo ese mentenimiento?
The computer asked B9 around 200k
Hi bro,i m Ali 64 yrs old,fm malaysia. Can u help me to get th wire to connect led taillight,convertion. And how much is th price.
Hi Ali. I found that on eBay, but now I cannot find the seller anymore.
@@GFI salam bro,ok thank,is that is th case,i got to duplicate th dighrmp.try to layout by my self.
I have a 2008 with a PCM2.0. Does your instructions work with my configuration?
It should be the same wiring. Have a look in your wires. It’s simple to pull the unit out.
If not the PCCM+ classic system is available for your 955 and should be compatible.
Seems that the resistor should be 50 Watt 6 Ohm
Thanks for the info.
Nice video, can I ask you how to disassemble the interior of back door.?
Hi. Just like I show in the video. You have a bunch of springs to pull.
Hello, Thanks you for video, I need reference for rear breaks Bosch
To be accurate it’s necessary to insert you car year and engine. I recommend you to check for example AUTODOC website, select your car and check the reference you need.
Hi where are you located?
Hi. Portugal.
Hm
Great Video, very informative. Thank you!
Thanks for your message. You have done more videos for the CLS in the channel.
Loved your video, man!
Thanks.
Boas, pelo vídeo. Só uma questão qual o aperto final de torque nos injectores??? Obrigado
Bom dia. O torque dos parafusos de fixação dos injetores é 26Nm para o motor N47.
Sabe me dizer qual o torque do bujão do óleo pra fazer o aperto
Bom dia. Depende do tamanho do bujão. Deixo os torques por tamanho. M12: 25Nm M18: 35Nm M22: 60Nm
Do I have to put the red one from the yellow thing in reverse-in?
It will depend how you want to feed the camera. Following my connection it work.
I have no wire with camera b+. Is all the names different for each brand?
Thanks for the video, it is really informative and encouraging. Is this jump starting tool really necessary when there is an auxiliary battery installed to car?
Thanks for your message. If you have the jumper it won’t hurt to connect it 😁
Leider kein Deutsch
It's nice to see other people repairing the 928 👍😀 I hope the 928 community on RUclips will grow in the future. As of now the 928 is an underrated car.
Thanks for your message. The next one on the 929 will refresh the intake system, fuel system and spark. Do not forget to subscribe 😁
Hi, dude. This is very good resolution. I have same problem with light. Do you have above the picture from print on the sale ? Thank you ...
Hi. Send me an email goforit.channel@gmail.com
Your video inspired me to make the change I had now added the LED Blinkers and the main light and I love it, it looks great and I will enjoy it on my rides
Great to get your message. That is my main goal, to inspire people to Go For It. Thanks for your message. Enjoy and ride safe.
Great video
Thanks